Mechanical seals

ТМ, ТМП, ТМД, ТМХ

Mechanical Seals of ТМ Make – intended for sealing of pump shafts that operate with crude oil, lubricants, oils, water solutions of acids/alkalies, waters, water condensate etc. as well as fluids which leakages into environment is allowed according to safety requirements

Mechanical Seals of ТМХ Make – with the thermal barrier. The mechanical seals are designed for pumps that operate with liquids, temperature of which exceeds 200 °С

Mechanical Seals of ТМП Make – with a secondary seal (a floating throttle bush) on the atmosphere side are designed for pumps that operate with crude oil, water solutions of agents which crystallize being exposed to air, polymerize or form depositions

Mechanical Seals of ТМД Make – with a secondary seal (a floating throttle bush) at the side of sealed product are designed for pumps operating with liquids that may be dissolved with water or other barrier fluids (oil, diesel fluid etc.)

ТМР, ТМР-П

ТМР – are single mechanical seals intended for sealing of rotating shafts of mixers, chemical reactors and other equipment with nonaggressive fluids, non-explosive and non fire-hazardous working fluids which leakages into environment is allowed according to safety requirements

ТМР – П – is the version with an rolling bearing

2ТМТ, 2ТМТ-Х

Mechanical Seals of 2ТМ Make – are intended for sealing of shafts of centrifugal machines that operate with gases and fluids, which have no corrosion action on mechanical seal parts, and leakage of which is inadmissible to the environment according to reference documents. They are used when leakage of sealed medium (poisonous, radioactive, combustible liquids) is inadmissible into the environment as well as if pumped product has poor lubricating ability (gases, liquefied gases) or pumped product is highly contaminated by abrasive inclusions (up to 25%), or can be coked, polymerized, crystallized etc.

2ТМР, 2ТМР-П, 2ТМФ, 2ТМФ-П

2ТМР – are double mechanical seals intended for sealing of mixer shafts, chemical reactors and other equipment, that don’t permit pumped liquid leakages

2ТМР-П – is the version with an rolling bearing

2ТМФ – are multi spring balanced double mechanical seals of cartridge type, fluoroplastic secondary seals are located on atmosphere side

2ТМФ-П – is the version with an rolling bearing

2ТМ, 2ТМ-Х

Mechanical Seals of 2ТМ Make – are intended for sealing of shafts of centrifugal machines that operate with gases and fluids, which have no corrosion action on mechanical seal parts, and leakage of which is inadmissible to the environment according to reference documents. They are used when leakage of sealed medium (poisonous, radioactive, combustible liquids) is inadmissible into the environment as well as if pumped product has poor lubricating ability (gases, liquefied gases) or pumped product is highly contaminated by abrasive inclusions (up to 25%), or can be coked, polymerized, crystallized etc.

 

ТБГ, ТБГ-П, 2ТБГ, 2ТБГ-П

Gas barrier mechanical seals mechanical seals intended for sealing of mixer shafts, chemical reactors and other equipment.